|
|
|
|
|
|
|
|
Head up Delay Option
|
|
The head-up delay option is used when hot stamping parts that require the foil to cool before it is removed from the part being stamped.
|
|
Sequence of operations:
|
| 1. | The Machine Print cycle started. |
| 2. | The print head comes down and contacts the part. |
| 3. | The Print Head stays down on the part for the time set on the print timer. |
| 4. | The Print Head starts going up for the Head Up Delay time. |
| 5. | The Print Head stops for the Stop time, allowing the foil to cool. |
| 6. | The Print Head continues up to its up position. |
| 7. | The Foil Pull Cycle starts. |
|
|
AFM Engineering makes Custom Options upon request
|
| |
|
|
|
SERVING THE PLASTICS INDUSTRY SINCE 1979 WITH SYSTEMS
AND SERVICES FOR SECONDARY FINISHING OPERATIONS |